The sliding clasp
Examples
Hoolahoop & one piece collection
Click here for all Klipoorbellen with sliding clasp.
Perfect for earlobe type
Thin-medium thickness & short-medium length earlobe
Instructions
The sliding clasp is easy to open and close by pulling the plate on the sliding clasp back with your nail or finger, sliding your earlobe between it and then letting go of the plate.
Tip:
There is a little bit of play in the sliding closure, you can very carefully push the ring apart a little bit to make the space for the earlobe a little larger. Please note: this is of course at your own risk, so do not go too far.
The twist lock
Examples
Classy Vibe
Click here for all Klipoorbellen with twist closure.
Perfect for earlobe type
All types
Instructions
The twist closure is perfect for all types of earlobes and therefore a perfect first clip earring. Turn the hinge completely open so that the gap between the hinge and the Clip Earring is as large as possible. Then open the Clip by pulling the hinge diagonally downwards. Slide the clasp around your earlobe, clip the clasp closed around your earlobe and tighten the twist lock until the Clip Earring fits firmly and comfortably.
Tip:
Shake your head again to check whether you have tightened it enough. We recommend always turning it just a little tighter than just against the earlobe, so that it stays in place.
The clip closure
Examples
Worth it & Whoop Hoop
Click here for all Klipoorbellen with clip closure.
Perfect for earlobe type
All types. You cannot adjust this, so you will probably feel a little more comfortable.
Instructions
The clip closure is easy to open and close by pushing open the clip closure away from the clip on earring, sliding your earlobe between them and pressing the clip closure against your earlobe.
Tip:
There is a little bit of play in the clip clasp, you can very gently push the clip earring and the clip clasp apart a little bit to make the space for the earlobe a little larger. Please note: this is of course at your own risk, so do not go too far.
The push closure
Examples
AlwaysTogether & Hoops I Did It Again
Click here for all Klipoorbellen with push clasp.
Perfect for earlobe type
Thin-medium thickness & short-medium length earlobe
Instructions
The push closure is easiest to put on by:
or pull the cushion back so that the space between the cushion and the clip-on earring increases, slide your earlobe between them and then press the cushion against the back of your earlobe with your thumb,
or by pressing the cushion against the clip-on earring closed and then sliding your earlobe between them from the thin part of your earlobe - halfway between your ear - to the thicker part - the lower part of the earlobe - and then pressing it closed even more with your thumb. against the cushion.
Tip:
We recommend leaving the cushion on the clasp, as the friction will keep the Clip earring in place even better.
NB: The above examples regarding earlobe type are only an indication. Every earlobe is different and it is very different and personal for each customer what fits or does not fit. The above is based on our own experiences and stories/feedback from our customers. If you have any doubts or have any questions, please contact us, we are happy to help you!!
